Відео

I have a whole mess of components on the way to me. I fully intended to pay someone to build it, but after watching your video I think I might just do it myself. Thank you very much for the detailed video!

loved this video for 2 reasons it was very well explained but best of all it was like listenin to a mate tellin me how to do it. thx

One question: is the thermal paste included in the packag

thanks

how about the fan confurigation? How to adjust fan intake and exhaust?

Hi! I got this case yesterday and followed your video to install my components in it, very helpful! Just have one question: I've set the lights to a constant dark blue, but everytime I shutdown and turn my PC on again, the lights revert back to the rainbow setting. I've gone through the user manual and I've found no way of fixing this. Any help?

Always great details

Thank you!

Hi, actually I got this case and I bought the gen 3 riser cable version with this Asus b760i motherboard and rtx 4060 ti card. Is this a problem???

Very helpful video! Now I feel I can buy with confidence. Thank you Christopher

Really appreciate the video it helped a lot going through the build process even tho I've built multiple PCs in the past, served as a good memory refresher. Was extremely well done in terms of camera angles to see exactly how to do each task and explanations.

Can you use Ryzen 7 7800x3d cpu with this motherboard?

I have a situation. Do you connect the GAII trinity cable into the fan hub? if so the head are smaller and divided into two pins. can you help?

im also building my next pc in this case with the arctic liquid freezer iii which is 38mm. my mobo is tomahawk b650 which has a pretty big heatsink and my idea was to replace the last vent with the slim version of it which is 10mm slimmer, do you think this would work and solve the touching issue?

Christopher great and very informative tutorial as soon as i get my parts i will be building my new PC. I Brought NZXT H9 flow Elite case for my build however i want be using NZXT fans due to there is way too many cables coming out of them and i went with Lian Li LS120 RGB Fans which are much better and more cleaner designed

Lovely tip. It will certainly help out with my aesthetics. 👍🏻👍🏻

What screwdriver size did you use the top of the case?

Just finished my build thanks for the help. This case was surprisingly easy to build in despite the small form factor because of how open it is with the panels off

how is this diferent from non ice model?

How much does it add to the total GPU assembly length?

It was really pretty amazing until the sideshow glass became a think tank. Can't fathom that much wee candy crush, so perhaps the ideas may have a rhetorically colluded enterage array symposium share. It would be nice if the metallic green or skin tone has such an auspicious eatx presence for RAID Mach ones.

Literally no one makes more comprehensive and useful guides for PC building.

I was successful with putting AIO on the side (exactly the same), but after that I realized, that I can't put all 3 fans on the roof, cause of AIO tubes.

I spent forever looking for the other front header cables only to see that the only one in the case is the power switch 😂 funny that they show a power led cable in the manual though!!

Is the liquid already incorporated in it? Do you think it is feasible to install this on a biostar h610mh? Thanks

My 120mm fan won’t line up with ANY of the back screw holes 😭 Manual says I can use a 120

Hi, I recently built a Pc with this case, buit i dont know how to change the rgb fans colours. Maube u can help me? Thanks u!

I actually dont know what to do anymore i tried everything i even bought a new controller and new fans (uni fan tl lcd) but the software still cannot detect them. (it can detect the AIO and the SL Infinity)

if you only have 1 140mm lcd fan you need to connect. do you still need a uni hub for it or could connect it directly to the MB somewhere?

Provided GPU support no good for EATX (X670E Taichi)....sadly.

How come the top part of my case didn’t come with ? Panel like your an I couldn’t find nun in any boxes ?

So, the Enermax Aquavision ist Compatible with AM5? You didn't have to re-drill the holes on the board?

What's your opinion on the case itself? Would you pick this one if you had the choice again? I know you said you like the white one over the black, but what about build quality, ease of cable management, etc?

Is there room for a 3,5 hdd in this build?

When you configure rear fan/ no rear fan or different speeds of rear fan, you look at the VRAM temps of that GPU and power temps. On the GPU itself differences are negligible. GPU doesn't fry, memory modules are often sizzle specially on 2k and 4K resolution. Specially if GPU is equipped with Micron or Hynix VRAM. GPU itself will just throttle down if is too hot. Another thing Fractal Torrent Compact is smaller and doesn't come with 3x 140mm fans only the front 2x180mm. Hope it helps.

Thanks! I had no idea the front panel could come off, this helped out a ton in cleaning!

The case is supposedly a full tower, but in the videos, it doesn't look that big. Do you think there is enough space to fit two 3080 Ti graphics cards? And what about the temperature? Considering it has double glass, which usually causes more heat.

“Whashhh up guysh tish my full shtep to shtep guide”☝🏻🤓

The aio radiator fans you had to set the speed on the fan itself. It’s that an insane design? Isn’t that software controlled? What if you needed to change that, you have to dissemble it again?

what would you recommend with this same case but a double aio configuration? @Christopher Flannigan

Hi, Christ, just wonder if you know how to have 2 I/O (one from original and additional) connect at the same time? what motherboard/Additional item do we need? Thank you

can i install RAM with 5600Mhz on this MB?

My PSCU is longer, i can use it to?

can we install 120mm front fan if we use sfxl psu?

Thanks for putting this video up! I do have a question or two. Is that the Fanttik S1 Pro screwdriver you're using? And from what I know the setting 1 is 1.5nm of torque. Is that not too much for tightening screws especially on motherboards(PCB) etc?

How do you get a static color when i select red for example with the case button the red color is only pulse mode so it fades not static?

I got one of these, unless it’s an older model of this one’s new and I’m tripping, I’m 2020. It’s still holding up really good. The glass broke when it fell off my desk (I’m dumb). Bought another one and it was insanely cheap so I wasn’t even mad. Nothing else broke and was perfect. Def a sleek design too and I’d recommend to anybody looking for a black case with glass and adequate fan space. Edit: mine had glass. Nonetheless, very similar and still recommend tbh.

Having some issues with Icue link set up. I was using Icue H150i Elite Capellix XT on a ROG Maximus Z790 Formula. Decided to change to an Icue link system. But the new set does not work.

Why does it have white fans on it, especially when it is a black case?

New to messing around with CPU power usage. This MOBO doesn't support overclocking, does that also mean undervolting isn't possible? Thanks.